NON-SLIP COVERS FOR STEPS

It shows the validity of the guarantee in years

Suitable for heavy duty

Non-slip fiberglass step covers for steps of any material (wood, concrete, gratings, extrusions, etc.)

Non-slip fiberglass covers for steps

The non-slip surface offers formidable slip resistance and also includes the angle of the step, which is the cause of most accidents.

Stairs can be quite slippery, especially if the steps or shoes are in contact with water, grease, or other slippery organic material.

Depending on the situation, working on stairs or stairways poses an increased hazard that can result in serious injury or even death.

It is therefore extremely important to cover potentially slippery steps with our anti-slip covers, to prevent accidents and falls.

They are made from quality fiberglass with built-in aluminum oxide grit.

This makes them almost indestructible and very slip-resistant.

Our non-slip covers fit directly into existing steps and can cover different depths and widths.

The covers also protect the steps on which they will be laid, extending their life and reducing maintenance costs.

These covers can be produced in any color combination and with any type of writing or logo, so that they can act as a reminder of safety or other type of communication

What are the benefits?

Our stair tread covers are typically used in marine, off-shore, industrial and commercial environments where old stairs or stairways of different material are used to access elevated areas.

Reduced Slip and Fall Hazards – The non-slip surface provides excellent grip, even when the ladder is wet or oily, making it safe for workers and passers-by to get on and off.
Improved ladder safety: By installing our step covers, the risk of slips and falls is greatly reduced.
Compliance with safety standards – Installing our stair covers can ensure that safety standards and regulations are met, reducing the risk of penalties for non-compliance or legal liability.
Reduce workplace accidents and injury-related costs – By reducing the risk of slips and falls, our stair tread covers reduce accident-related costs.

CERTIFIED MATERIALS

SUPPLY

The supply is tailor-made according to the length and depth of the step and the number of steps of each staircase or ascent.

The quote includes the cut to size and the specific silicone for the type of application.

It is also possible to order 3000 mm long profiles to be cut independently.

INFORMATION NEEDED FOR THE QUOTE

To receive the quote, the following data must be communicated to the preventivi@svelt.it office:

Step length and depth,
Desired coloring.
Number of steps
Any personalized pictograms
Type of finish : industrial or off-shore

GLUING SYSTEM AND APPLICATION ON STEPS WITH SMOOTH SURFACE

Clean and degrease the surface of the step by cleaning it of dust, paint or other material residues
Make sure that the contact surface of the GRP profile is clean (free of dust or impurities).
Apply the adhesive to the contact surface of the step with the special silicone pipe gun when applying on solid steps (concrete, wood, extrusions, aluminum, etc.)
The application must have a wavy pattern in order to expand the gluing surface.
Immediately place the profile on the step by pressing with your hand for a few seconds
Allow to dry for 24 hours before using the scale
Each glue tube has a linear yield that depends on the type of step.
It is advisable to have additional glue pipes to avoid running out during installation

GLUING SYSTEM AND APPLICATION ON STEPS WITH A CHEQUERED METAL SURFACE

In the case of a chequered metal surface, it will be necessary to glue a strip of industrial rubber (supplied) beforehand

on the step and then glue the fiberglass profile (see video 1).

GLUING SYSTEM AND APPLICATION ON STEPS WITH GRILLED SURFACE

If a profile is applied on grating steps, assembly kits will be provided consisting of clips to be placed under the steps together with screws and nuts (see video 2)

GLUING SYSTEM AND APPLICATION ON STEPS WITH CONCRETE SURFACE

If a profile is applied on concrete steps, it will be necessary, in addition to applying the glue to be spread on the profile, also to drill the profile and the concrete by inserting a dowel, fixing the profile with screws (see video 3).

HOW TO CHOOSE THE CORRECT COVER BASED ON STEP SIZE

It will be sufficient to communicate to SVELT the data of the width and depth of the step.

For information and quotes:

Virgilio Illarietti

Product Manager

Cell.329 80576 93

Email : virgilio@svelt.it