V2FCT Manual ladder with 2 trunks 100% fiberglass

V2FCT Manual ladder with 2 trunks 100% fiberglass

Name: V2FCT Manual ladder with 2 trunks 100% fiberglass
Brand: Svelt

Max height 8.25 m

Suitable for heavy duty

2-section ladder 100% in dielectric fiberglass (uprights/rungs) only leaning against the wall for applications in electrical, food, chemical, brackish environments.

V2 FCT is 100% FIBERGLASS (UPRIGHTS AND RUNGS)

It is a series of professional ladders with 2 trunks that can only be used with manual extension.
They are built with both rungs and fiberglass uprights.

They are suitable for operators who are working near cables, sockets or other sources of electricity.

Also suitable for special uses in areas with high electrical or food or chemical hazards where aluminium cannot enter.

STANDARD EQUIPMENT

Sliding wheels on the wall from 10 rungs

Anti-slip hook

Last 3 red safety rungs (not walkable). The operator must remain with his feet under the red rungs.

Basic Spreader Stabilizer (Standard)

30 mm non-slip pegs / Distance between rungs 28 cm.

Use and maintenance manual.
Identification label.
Upright profile 70x28 mm
Antimagnetic and resistant to moisture, acids, corrosion and ultraviolet rays.
Screws and metal parts in stainless steel.

ON REQUEST (all accessories must be ordered with the ladder)

Yellow belt to support the pole (optional)

Hooks (optional)

TECHNICAL FEATURES

Model	Pegs Number	Height closed m	Height open m	Weight Kg
FIBRAFCT06	2X6	1,89	2,65	14
FIBRAFCT07	2X7	2,17	3,21	15,5
FIBRAFCT08	2X8	2,45	3,77	17
FIBRAFCT09	2X9	2,73	4,33	18,5
FIBRAFCT10	2X10	3,01	4,89	21
FIBRAFCT11	2X11	3,29	5,45	22
FIBRAFCT12	2X12	3,57	6,01	24
FIBRAFCT13	2X13	3,85	6,57	25
FIBRAFCT14	2X14	4,13	7,13	27
FIBRAFCT15	2X15	4,41	7,69	35
FIBRAFCT16	2X16	4,69	8,25	38

REGULATIONS

The V2FCT ladder series has been successfully tested according to the following standards:

EN 131-1: 2015+A1:2019 + A2:2025
EN 131-2: 2010 + A1:2012 + A2:2017 + A3:2025
EN 131-3: 2018 + A1:2025

EUROPEAN STANDARD EN 61478 UP TO 30 kV:

Insulating ladder for electrical work – Tested according to EN 61478 up to 30 kV.

Designed for professional applications in the electrical sector, this insulating ladder has passed the tests required by the EN 61478 standard (Live working – Ladders of insulating material), according to the requirements and test conditions applicable up to 30 kV, as documented by the relevant test reports.

EN 61478 is specifically dedicated to ladders made of insulating material intended to facilitate access when working on live electrical systems.

Passing the documented tests attests to the verified performance of the product under the specific test conditions envisaged.

The ladder is intended only for qualified personnel, trained in electrical work, and must be used in compliance with safety procedures, the manufacturer's instructions and the intended operating conditions.

Compliance with EN 61478 tests: documented by test report.

Declared test level: up to 30 kV, within the limits and according to the methods indicated in the technical documentation of the product.

The product may only be used near low-voltage electrical installations.

Do you need more information?

Our experience is at your service to support you and recommend the right product.

Information request

One of our experts will contact you without any obligation.

V2FCT Manual ladder with 2 trunks 100% fiberglass

2-section ladder 100% in dielectric fiberglass (uprights/rungs) only leaning against the wall for applications in electrical, food, chemical, brackish environments.

Insulating ladder for electrical work – Tested according to EN 61478 up to 30 kV.