Italia
España
France
Nederland
Romania
Россия
Україна
Deutschland
V1FH Single-trunk ladder 100% fiberglass
Single-trunk ladder 100% in dielectric fiberglass (uprights/rungs) for applications in electrical, food, chemical, brackish environments.
- Last 3 red safety rungs (not walkable). The operator must remain with his feet under the red rungs.
- Ergonomic articulated foot (standard) for stairs up to 3 m (stainless steel screws and plates)
- 30 mm non-slip pegs / Distance between rungs 28 cm.
- Basic stabilizer (standard) for ladders over 3 meters high in accordance with the European UNIEN131 standard
- Antimagnetic and resistant to moisture, acids, corrosion and ultraviolet rays.
- Screws and metal parts in stainless steel.
- Operation and maintenance manual
- Identification label
| Technical features | |||||||
Code | Pegs n. | Height m | Width external Ramp cm | Width internal Ramp cm | Profile Uprights mm | Weight Kg | Type of support on the ground |
FIBRAFH6 | 6 | 1,88 | 44 | 40 | 60x22 | 6,0 |  |
FIBRAFH7 | 7 | 2,16 | 44 | 40 | 60x22 | 6,5 | |
FIBRAFH8 | 8 | 2,44 | 44 | 40 | 60x22 | 7,0 | |
FIBRAFH9 | 9 | 2,72 | 44 | 40 | 60x22 | 7,5 | |
FIBRAFH10 | 10 | 3,00 | 44 | 40 | 60x22 | 8,0 |
 |
FIBRAFH11 | 11 | 3,28 | 44 | 40 | 60x22 | 8,5 | |
FIBRAFH12 | 12 | 3,56 | 44 | 40 | 60x22 | 9,0 | |
FIBRAFH13 | 13 | 3,84 | 48 | 45 | 70x28 mm | 10,5 | |
FIBRAFH14 | 14 | 4,12 | 48 | 45 | 70x28 mm | 11,5 | |
FIBRAFH15 | 15 | 4,40 | 48 | 45 | 70x28 mm | 13,0 | |
FIBRAFH16 | 16 | 4,68 | 48 | 45 | 70x28 mm | 14,0 | |
FIBRAFH17 | 17 | 4,96 | 48 | 45 | 70x28 mm | 15,0 | |
FIBRAFH18 | 18 | 5,24 | 48 | 45 | 70x28 mm | 16,0 | |
FIBRAFH19 | 19 | 5,52 | 48 | 45 | 70x28 mm | 17,0 | |
FIBRAFH20 | 20 | 5,80 | 48 | 45 | 70x28 mm | 18,0 | |
FIBRAFH21 | 21 | 6,08 | 48 | 45 | 70x28 mm | 19,0 | |
ON REQUEST
- Yellow belt to support the pole (optional)
- Hooks (optional)
- Adjustable telescopic legs with stainless steel screws and plates (optional). To be requested together with the ladder.
- Model with oversized pegs of 65 mm foot support.
- Height-adjustable legs with stabilizing base compliant with the UNIEN131 standard for stairs over 3 meters high.
REGULATIONS
The V1FH ladder series has been successfully tested according to the following standards:
- EN 131-1: 2015+A1:2019 + A2:2025
- EN 131-2: 2010 + A1:2012 + A2:2017 + A3:2025
- EN 131-3: 2018 + A1:2025
Insulating ladder for electrical work – Tested according to EN 61478 up to 30 kV.
Designed for professional applications in the electrical sector, this insulating ladder has passed the tests required by the EN 61478 standard (Live working – Ladders of insulating material), according to the requirements and test conditions applicable up to 30 kV, as documented by the relevant test reports.
EN 61478 is specifically dedicated to ladders made of insulating material intended to facilitate access when working on live electrical systems.
Passing the documented tests attests to the verified performance of the product under the specific test conditions envisaged.
The ladder is intended only for qualified personnel, trained in electrical work, and must be used in compliance with safety procedures, the manufacturer's instructions and the intended operating conditions.
Compliance with EN 61478 tests: documented by test report.
Declared test level: up to 30 kV, within the limits and according to the methods indicated in the technical documentation of the product.
The product may only be used near low-voltage electrical installations.
